Charging Via Mains Power Supply; Charging Via Solar Panel; Technical Specifications; General Informations - AgfaPhoto POWERCUBE 100Pro Bedienungsanleitung

6.3. CHARGING VIA MAINS POWER SUPPLY

Using the included AC Wall Charger, plug the unit into any wall outlet to charge the unit. you will know
the unit is charging when the blue LED battery indicators are blinking. The unit is fully charged when
all battery indicators stop blinking and remain solid. After the unit is fully charged, please remove the
AC wall charger in time.

6.4 CHARGING VIA SOLAR PANEL

7. TECHNICAL SPECIFICATIONS

Working temperatures
Management system
Input | 1x 3.5mm DC35135
Output | 2x USB (QC 3.0)
Output | 1x Type-C (PD 3.0)
Output | 1x 5.5mm DC5521
30
Net. Weight
Dimensions (LxWxH)
Certificates
Cell type
Output | Capacity
Lifecycles
Output | 2x USB
Output | 1x AC
1. Place your solar panel where it will get as much
direct sunlight as possible.
2. Plug the output of the solar panel into the input
of the unit to start charging.
you will know the unit is charging when the blue
LED battery indicator lights up and flashes.
The unit is fully charged when all battery indi-
cators stop flashing and remain solid.

General informations

-10°C - +40°C (14°F - 104°F)
165 x 80 x 117 mm (6.49 x 3.14 x 4.60 inch)
Battery
80W continuous, 120W peak | 88.8 Wh
Overcharge Protection, OverDischarge Protection,
OverCurrent Protection, OverPower Protection,
Short-Circuit Protection
Ports
15~24 V, 1.2 A max.
5 V, 2.4 A (Total 4.8 A max.)
5-12 V, 2 A (Total 5 V, 3.4 A, 18 W max.)
5 V, 3 A / 9 V, 2 A / 12 V, 1.5 A (18 W max.)
12-16.8 V, 10 A (13 A max.)
230 V / 50 Hz 80 W (120 W max.)
1.04 kg (2.29 lbs)
CE, FCC, UN38.3
Lithium-Ion
>500