Connecting The Cables; Technical Data; Technical Specifications Ant793-8Dp - Siemens ANT793-8DP Kompaktbetriebsanleitung

All manuals and user guides at all-guides.com

Technical data

4.2

Connecting the cables

Procedure
1. Screw the connecting cable for the SCALANCE W-700 to the antenna. The
tightening torque at the N connector is 1.7 Nm. If there is greater mechanical load
(for example vibration) a maximum 3 Nm is permitted.
2. Make sure that the connecting cable does not cause any tensile load on the
SCALANCE W700 nor on the antenna.
5 Technical data
5.1

Technical specifications ANT793-8DP

Technical specifications
Article number
Electrical data
Frequency range
Antenna gain
Horizontal radiation
angle
Vertical radiation angle
Impedance
Polarization
Standing wave ratio
(VSWR)
Permitted ambient conditions
Ambient temperature
Design, dimensions and weight
Connector
Materials
40
6GK5793-8DP00-0AA0
4900 ...
4940 MHz
13 dBi
40°
35°
50 Ω
Vertical
1.5
During device
operation
During storage
During
transportation
1 x N connector, female
Lexan EXL 9330
4940 ... 5350 MHz
13.5 dBi
40°
35°
50 Ω
1.5
-40 ℃ to +80 ℃
-40 ℃ to +80 ℃
-40 ℃ to +80 ℃
C79000-G8974-C320-02, 01/2017
ANT793-8DP