Flat Panel Roll Stand - Stryker 240-099-109 Bedienungsanleitung

Parts Reference
The following parts and hardware are included with this installation kit (see photos for
parts, hardware not shown):
Item # Description
1 Base Assembly (includes casters)
2 Post, Variable Height (with factory-mounted accessories)
3 Foot Pedal Assembly
4 1/4-20 x 3/4'' Socket Head Cap Screw (SHCS)
5 Lock Washer, 1/4''
6 Handle
7 #10-32 x 9/16'' Pan Head Machine Screw (PHMS)
8 VESA Mounting Adapter
9 M4 x 8mm PHMS
10 Cable Clips
11 3/16'' Hex Key, T-Handle
12 9/64'' Hex Key
Base Assembly
Tools Required: Phillips screwdriver (not provided), 3/16'' T-handle and 9/64'' hex keys (provided).
CAUTION:
DO NOT MOVE ROLL STAND WHILE DISPLAY IS IN HIGHEST VERTICAL POSITION. LOWER DISPLAY
BEFORE MOVING ROLL STAND.
DO NOT DISASSEMBLE ANY COMPONENT OF THE ROLL STAND ASSEMBLY.
DO NOT MOUNT A LOAD ON THE ROLL STAND THAT EXCEEDS 33 LB [14.9 KG].
TOTAL MASS WITH MAX. LOAD: 95 LB [43 KG].
NEVER APPLY FORCE AT TOP – ALWAYS PUSH NEAR MIDDLE.

Flat Panel Roll Stand

Variable Height Post
Cable Clips (5)
Foot Pedal Assembly
Qty
1
1
1
2
2
1
2
1
8
5
1
1
Handle
VESA Mounting Adapter
EN-5