Maintenance; Warranty - Beta 1838E Bedienungsanleitung

EN
OPERATION MANUAL AND INSTRUCTIONS
Charge level
The battery charge level is shown by a LED charging indicator near the type-C USB charging port. The LED lights up when the
battery is connected to the power supply.
If the battery is not fully charged, the LED charging indicator is red.
When the battery is fully charged, the LED charging indicator turns green.

MAINTENANCE

Maintenance and repair jobs must be carried out by trained personnel only. For such jobs, you can contact Beta Utensili S.P.A.'s
repair centre.
DISPOSAL
The crossed-out wheelie bin symbol on the equipment or packaging means that the product should be collected separately from
other types of urban waste at the end of its useful life.
Any user who is going to dispose of this tool can:
- deliver it to an appropriate collection facility for electronic and electrotechnical equipment;
- return it to the dealer upon purchase of a new, equivalent item of equipment;
- in case of a product for professional use only, contact the manufacturer which will arrange for the product to be properly disposed
of.
Proper disposal of this product allows the raw materials contained in it to be reused and prevents damage to the environment
and human health.
Illegal disposal of this product is a violation of the provision concerning the disposal of hazardous waste and will give way to the
application of such fines as provided for under current regulations.

WARRANTY

This lamp is manufactured and tested in accordance with current EU regulations. It is covered by a 12-month warranty for
professional use or a 24-month warranty for nonprofessional use. We will repair any breakdowns caused by material or
manufacturing defects by fixing the defective pieces or replacing them at our discretion. Should assistance be required once or
several times during the warranty period, the expiry date of this warranty will remain unchanged. This warranty will not cover
defects due to wear, misuse or breakdowns caused by blows and/or falls. In addition, this warranty will no longer be valid if any
changes are made, or if the lamp is forced or sent to the customer service in pieces.
This warranty explicitly excludes any damage to people and/or things, whether direct or consequential.
DECLARATION OF CONFORMITY EU
We hereby declare, assuming responsibility, that the described product complies with the relevant provisions
of the following Directives:
• Low Voltage Directive (LVD) 2014/35/EU
• Electromagnetic Compatibility (EMC) Directive 2014/30/EU;
• Directive 2011/65/EU on the restriction of the use of certain hazardous Substances -Ro.H.S. 2011/65/UE
The Technical Brochure is available at:
BETA UTENSILI S.P.A.
Via A. Volta 18,
20845 Sovico (MB)
ITALY
7