Balance; Colour Temperature; Ssm; Avl - jWIN JV-DTV23 Bedienungsanleitung

15. Balance (Command2 : j)
G To adjust balance.
You can also adjust balance in the SOUND menu.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64
•
Refer to 'Real data mapping 1'. See page 38.
Acknowledgement
[j][ ][Set ID][ ][OK][Data][x]
16. Colour Temperature (Command2 : u)
G To adjust colour temperature.
You can also adjust Color Temp. in the PICTURE menu.
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 0: Cool 1: Normal 2: Warm
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
17. PIP Input Select (Command2 : y)
G To select input source for sub picture in PIP/Twin picture
mode.
Transmission
[k][y][ ][Set ID][ ][Data][Cr]
Data 0 : TV 3 : S-Video
1 : AV1 4 : Component(480i)
2 : AV2
Acknowledgement
[y][ ][Set ID][ ][OK][Data][x]
* In Component 480i for main picture, you can select RGB and DVi
for sub picture.
All manuals and user guides at all-guides.com
* Real data mapping 1
0 : Step 0
A : Step 10 (SET ID 10)
F : Step 15 (SET ID 15)
10 : Step 16 (SET ID 16)
64 : Step 100
18. SSM (Command2 : h)
G To select sound mode.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data 1 : Flat
2 : Speech
3 : Movie
Acknowledgement
[h][ ][Set ID][ ][OK][Data][x]
19. AVL (Command2 : k)
G To keeps on an equal volume level even if you change
programmes.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data 0: Off
Acknowledgement
[k][ ][Set ID][ ][OK][Data][x]
* Real data mapping 2
0 : -10
5 : -9
A : -8
2D: -1
32 : 0
37 : +1
5F : +9
64 : +10
4 : Music
5 : User
1: On
EN
37 37