Specifications - AquaMaster Tools pH Temp meter P50 Pro Benutzerhandbuch

Replacing the electrode
1. Properly unscrew the sealing ring in the lower part of the meter.
2. Remove the defected/old electrode by gently pulling it.
3. Carefully place the new electrode with the recess in the correct
position so that the connectors properly connect and do not damage
the meter or electrode.
4. Check that the rubber seal is properly placed.
5. Tightly tighten the sealing ring.
6. Calibrate the meter as described in this manual.
7. The meter is now ready for use.

Specifications

Range
Resolution
Accuracy
Operation temperature
Battery indicator
Auto. power-off
Battery
Dimensions
Weight
EN
pH: 0,0 ~ 14,0 pH
Temperature: -50°C ~ 70°C (-58°F ~ 158°F)
pH: 0,1 pH
Temperature: 0,1 ºC (0,2 ºF)
pH: ±0,1 pH
Temperature: ±1°C (±2°F)
Temperature compensation: 0°C - 50°C
(32°F - 122°F)
0°C ~ 50°C (32°F ~ 122°F)
Yes
After 8 minutes
3 × 1,5 Volt AG-13 button cell (included)
220 x 40 x 40 mm
102 grams
10