HIKVISION EXIR Schnellstartanleitung Seite 15

Network Bullet Camera·Quick Start Guide
3.
Align the screw holes on the camera mounting base with those on the
pedestal, and fix the camera to the pedestal with the supplied screws.
4.
Loosen the fixing screw, and adjust the panning position. Tighten the fixing
screw after adjustment.
Figure 1-7
Remove the Pedestal
Figure 1-8
Fix the Camera to the Pedestal
Fixing Screw
Pan: -45° to 45°
Figure 1-9
Adjust Panning Position
13