Baseus Encok WM01 Plus Benutzerhandbuch Seite 6

Single earphone use
Start – Pick up the earphone from the charging case, turn on the left and right
•
earphone to pair automatically, then enter the two-ear pairing mode.
Shutdown – put the earphone into the charging case and the earphone will
•
power off automatically. The charging case will charge the earphone
automatically.
Double touch the earphone - Play / Pause / Answer / Hang up
•
Music Mode
Long press left / right earphone for 2 seconds – Previous song / Next song
•
Long press right earphone for 2 seconds – Play / Pause
•
Double-click the left earphone – Activate voice assistant
•
Call mode
Double-click the left and right earphone - Answer / Hang up
•
Long press left and right earphone – Reject a call
•
Restore factory settings
Turn off the wireless of the surrounding phones. Put the earphones into the
•
charging case, open the lid and take out the earphones. When the white light of
one earphone flashes quickly and the other earphone's light flashes slowly, touch
left or right earphone three times, then the red light of the earphone flashes
once. The earphones are now restored to the factory settings. Put them into the
charging case and take them out again. Lastly, turn on the phone's wireless to
search for the earphones to reconnect and use.
Turn off the wireless of the surrounding mobile phones. Take out just one
•
earphone. When the white light flashes quickly, touch the earphone three times,
then the red light flashes once. This earphone is now restored to the factory
settings, return it to the case. Take out the other earphone and repeat the
operation. After both are restored, put them both into the charging case, take
them out and search them to reconnect and use
Pairing mode
When pairing for the first time, please make sure the distance between wireless
•
earphone and mobile phone is within 1 m.
Open the charging case and the earphones will automatically power on. The
•
earphone indicators will flash twice – one quick and one slow flash. Enter the
dual earphone mode.
Turn on the wireless function of the mobile phone, search for the wireless
•
devices, select the device named "Baseus Encok WM01" and click connect.
If needed, enter pairing password "0000".
•
Please repeat the above operation if the pairing fails. The indicator will turn off
•
after the pairing is successful.
6