Waves FH-101683 Bedienungsanleitung Seite 6

Parts description
1. Indication light
2. Thermostat control switch
3. Oscillating Button
4. Heat select switch
5. Air outlet grille
6. Air intake grill
Heat setting:
The fan heater incorporates a rotatable switch; you can select the setting by turning the
switch clockwise to:
0 OFF
FAN ONLY
I WARM AIR (750 W)
II WARM AIR (1500 W)
Means " DO NOT COVER "
THERMOSTAT:
When the fan heater is switched on:
1. Turn the thermostat knob in a clockwise direction to the max position.
2. Once the room temperature has reached the desired value, turn the thermostat knob
slowly in anti-clockwise direction until you hear a "click" sound; this is the setting
temperature. Now, the unit is switched off and the indicator lights are off.
3. The unit will automatically maintain the set temperature. It will switch on when the
room temperature is below the setting, and switch off if it is above the setting.
4. The red indicator shows that the unit is switched on.
Safety system:
The appliance has a safety system which automatically switches the unit off when
overheated.
If overheating occurs, remove the plug from the socket, push the buttons to switch the
unit off and let it cool down for at least 10 minutes. Put the plug in the socket and
switch the heater on.
Maintenance:
The fan heater only needs regular cleaning on the outside.
Before you clean the unit, turn the switch OFF. Remove the plug form the socket and
wait until the fan heater cools down.
Use a damp cloth to wipe the heater housing.
Do not use detergents, abrasive cleaning liquids or chemicals (alcohol, gasoline etc.)
to clean the appliance