Henkel Loctite 97152 Bedienungsanleitung Seite 58

2 Description
10
11
58
9
8
8 Button: Preselection of stored dispense programs
For manual selection of stored dispense applications. The display shows the
selected application in the 3rd line, indicated as letters (a-d) in square
brackets.
9 Button: Time
With preselected channel, the value setup menu is displayed.
– For adjusting dispense, pre-delay and post-delay times.
If this key is pressed without preselecting a channel, Channel A will be
automatically switched to active mode.
10 Button: Enter
– For storing a setting.
– For resetting error messages. This function has priority when error
messages are displayed.
11 Button: ESC / Lock
– For leaving submenus without storing the values.
– For aborting input of values without storing.
– In the Operation display view, the system can be locked/unlocked by
keeping the key depressed for more than 2 s.
This prevents unauthorized access. A PIN must be entered for activation or
deactivation.