Using The Keyboard - Laserworld Club Serie Bedienungsanleitung

4. IR remote controller
Button Function / Button
On/Off button
Auto mode
Sound mode
Pause
Pattern selection
Text mode
Clock mode
Numbers
Prev/Next
Mirror Effect
5.

Using the keyboard

Use the keyboard to access menu options, select laser patterns, and enter different mo-
des. To use the keyboad with the laser, do the following:
1. Connect the USB cable of the keyboard to the USB interface on the back of the laser
projector.
2. Connect the laser to the mains.
Menu Options
To select the menu options using the keyboard, do the following:
1. Press to access the menu options. The laser output displays the current menu option.
2. Use to scroll through the menu options: 1. AUTO, 2. SCENE, 3. MUSIC, 4. CLOCK, 5.
TEXT and 6. DMX.
3. Press to confirm the selection.
Manual: Club Series CS-500RGB KeyTEX
Description
Turns laser on/off
Laser runs in auto mode. Red LED indicator lights. Press the number
buttons to get different design patterns
Sound-active mode. Blue LED indicator flashes when sound is de-
tected. Sound-active mode displays the same design packs as auto
mode, but responds to sounds. Press and hold to enable sound
sensitivity adjustment. Use 1 (least sensitive) to 9 (most sensitive)
Pauses the program. Press again to continue the program
Press button to enter the pattern selection and select one of the
available patterns by pressing the number buttons.
Press to enter the text mode, then press any numbered button.
Enter text using the keyboard. Red and blue LED indicator lights.
Press numbers on the number pad to set the time and press ‚SPACE'
to start the clock function
Press to select a number
Press to go to a previous / next step
Press and hold to mirror the laser projection. Press repeatedly for up
to 4 mirrored options
page 5 / 10