Seite 1
CS-800G Manual Read carefully before using this device! Bedienungsanleitung Bitte lesen Sie diese Bedienungsanleitung, bevor Sie das Gerät in Betrieb nehmen! Das Inhaltsverzeichnis ist leer, da keiner der Absatzstile, die in den Informationen „Dokument“ ausgewählt sind, im Dokument verwendet wird.
Checking parts Please check if all listed parts are included, and are not damaged. Included: 1 x Laser projector 1 x Power cable 1 x 9-pin plug 2 x key 1 x manual Safety instructions If the device has been exposed to great temperature changes, do not switch it on immediately. Condensation water may damage your device.
Manual / Bedienungsanleitung: CS-800 G 3 / 10 Regularly open the device (see “cleaning” further down) to check for dust inside, or if fog fluid condenses in the housing (if so rearrange hazer and/or laser position). Operating temperature is 10~35°C . In a new installation, check after some 15-30 minutes whether the outlet air gets too warm.
This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual. Laserworld cannot be made liable for damages caused by incorrect installations and unskilled operation! This manual is subject to changes without notification, errors and omissions expected.
Seite 6
Manual / Bedienungsanleitung: CS-800 G 6 / 10 Lieferumfang Bitte prüfen Sie, ob Sie wirklich alle Teile erhalten haben und ob diese von der Lieferung unbeschädigt sind. Zum Lieferumfang gehören: 1 x Laser Projektor 1 x Kaltgerätekabel zur Stromversorgung 1 x 9-poliger Blindstecker 2 x Schlüssel 1 x Bedienungsanleitung Hinweise zur Inbetriebnahme:...
Manual / Bedienungsanleitung: CS-800 G 7 / 10 Um die Lebensdauer Ihres Lasers zu erhöhen: Schützen Sie das Gerät vor Überhitzung: Immer für ausreichende Ventilation sorgen. Keine Scheinwerfer (insbesondere kopfbewegte) auf das Gerät richten. Regelmässig das Innere und besonders die Lüfter von Staub reinigen. Nach jeder Neuinstallation nach ca.
Sollten Änderungen an dieser Bedienungsanleitung vorgenommen werden, können wir Sie darüber nicht in Kenntnis setzen. Bitte kontaktieren Sie für Fragen Ihren Händler. Für Service wenden Sie sich bitte an Ihren Händler oder an Laserworld. Verwenden Sie bitte nur Laserworld Ersatzteile.
Seite 10
Manual / Bedienungsanleitung: CS-800 G 10 / 10 Laserworld (Switzerland) AG Kreuzlingerstrasse 5 8574 Lengwil-Oberhofen SWITZERLAND Authorized person: Supervisory board Mr Martin Werner place of business: 8574 Lengwil-Oberhofen / SWITZERLAND company number: CH-440.3.020.548-6 Commercial Registry Kanton Thurgau www.laserworld.com info@laserworld.com representative according to EMVG:...