Inhaltsverzeichnis
Werbung
Where supplied, the use of a anti-rotation insertis (
carabiner on its major axis.
Ref. 2030 026F - 2030 040F - 2030 074F: For use of Goblin Rope Surfer see the manual of the Goblin
device.
Use as to ANSI/ASSE Z359.1-2007 Anchorage connector (Anchor Webbing 2032 and Anchor Cable 2132)
Anchor Webbing and Anchor Cable are tested as anchorage connectors as to ANSI/ASSE Z359.1-2007, to create
an anchor point on a structure.
For installation, see
with sharp edges or abrasive surfaces Anchor Cable can be used, do not use Anchor Webbing. Take proper safety
measures while using this product around moving machinery and electrical hazards.
Strength is compliant with ANSI/ASSE requirements for one person: 5000 lbs / 22.2 kN. Do not connect more than
one personal fall arrest system.
INSTRUCTIONS FOR USE – CARABINERS
Summary
suitable for use in fall arrest systems for protecting against the risk of falling from heights. Some models are even
connectors are highlighted in Tab. K, identifying the reference code(s) on the marking of the connector(s) supplied
with the product.
Classes (Tab. K)
directional connector. Class Q: quick link. Class M: multiple use connectors.
EN 12275:2015. Class B: basic connector. Class H: connector for connection using a sailor's knot. Class K:
Connector for via ferratas. Class X: oval connector. Class Q: quick link.
The main material that the connector is made from is indicated in Tab. K in the "Material" column: S = Steel, SS =
Stainless Steel, AL = Aluminum alloy.
Use
the fall height.
The connection of the connector is indicated in the tab.K
locking (
) must avoid detaching them several times in the same working day.
The quick links are used for connections that are not opened often, we recommend closing with a torque of 3 Nm
must always be avoided (
system and to other components in a fall protection system, see
resistance (
). Avoid positions that can stress the connector lever (
stress on the lever, choose to use ANSI Z359.12 connectors that have greater lever strength (
CHECKING AND MAINTENANCE - CARABINERS
A carabiner looses half of its resistance when the gate is open (see Tab.K): check the correct operation the lever prior
to use: The lever must return against the connector body when closed, the automatic locking device must close fully
and use ANSI Z359 connectors: do not install in other ways, in case of structures
). For proper use and for connection to a reliable anchoring point with only one sub-
29
) is highly recommended in order to load the
K1 to K6. The user of connectors with manual
. Some situations can reduce the connector's
); if it is not possible to avoid
).
Werbung
Inhaltsverzeichnis
