Working Mode; Factory Reset - Sonoff DIY DUAL Bedienungsanleitung

SONOFF TECHNOLOGIES CO., LTD.
Wi-Fi LED indicator status instruction
LED indicator status
Flashes (one long and two short)
Keeps on
Flashes quickly
Flashes quickly once
Flashes quickly twice
Flashes quickly three times

Working Mode

After pairing, select the corresponding mode from switch, motor and meter modes
according to the connected device.
Switch Mode:
Control two output loads independently.
Motor Mode:
Suitable for four-wire tubular motors such as curtain and roller blind motor.
Meter Mode（DUALR3）：
The relay keeps on, and can not be turned off. Focusing on power metering.
Switch Network
If you need to change the network, long press the pairing button for 5s until the Wi-Fi
LED indicator changes in a cycle of two short and one long flash and release, then
the device enters Bluetooth pairing mode and you can pair again.

Factory Reset

Deleting the device on the eWeLink app indicates you restore it to factory setting.
Status instruction
Bluetooth Pairing Mode
Device is connected successfully
Compatible Pairing Mode
Unable to discover the router
Connect to the router but fail to connect to server
Upgrading
S2 S1
1
2
N In L In L In L
Out
2 L
Out
1
15
English