Description Of The Controls; Program Playback - AEG BSS 4811 Bedienungsanleitung, Garantie

Description of the controls

(3/6)
You can pause and continue music playback. Press again to
continue playback.
NOTE:
The symbol "II" will indicate the activated function in the
display.
(10/4)
Press 1 x = Will re-start the current song from the begin-
ning. (Only in Bluetooth mode)
Press 2 x = Skip to the previous song.
Press 3 x = Skip to the song before the previous song.
• Press and hold the button to fast rewind playback.
NOTE:
The display will briefly show the number of each respective
track.
(10/4)
Press to skip to the next song and the following songs.
NOTE:
The display will briefly show the number of each respective
track.
REPEAT (5) (only in USB/SD mode)
Activates the Repeat function.
Press 1 x = Press the button to repeat only the current
title. The display will briefly show "
Press 2 x = Press the button again to play the current
folder (if available). The display will briefly
show " ".
Press 3 x = Play all tracks. The display will briefly show
" ".
Press 4 x = Cancel all functions. The display will briefly
show " ".
NOTE:
The activated function cannot be displayed permanently
due to technical reasons.
RANDOM (2) (only in USB/SD mode)
Activates random playback. All titles are played back in a
random sequence. The display will briefly show "
the button again to deactivate the function. The display will
briefly show " ".
NOTE:
The activated function cannot be displayed permanently
due to technical reasons.
− MEMORY / FOLD. +/10 (7) (only in USB/SD mode)
• During playback, press this button to skip forward or
backwards 10 tracks respectively (if more than 10 tracks
are available on the storage medium).
• Press and hold this button to skip to the next or previ-
ous folder (if several folders are available on the storage
medium).
STOP (11) (USB/SD mode only)
Stop playback of music tracks.

Program playback

During USB/SD stop mode, you may program tracks in any
sequence for playback.
1. Press the STOP button (11).
2. Press the MEMORY/PROGRAM button (9). "P01"
("memory location") will flash in the display.
3. Use the / buttons (10/4) to select the desired track,
and press MEMORY/PROGRAM again. The display will
then show "P02".
4. Use the / buttons to select the next track, and press
MEMORY/PROGRAM again. Repeat until you have
programmed all desired tracks.
5. Press the PLAY/PAUSE button (3/6) to start playback.
NOTE:
The activated function cannot be displayed due to
technical reasons.
6. When pressing the STOP button once, playback will be
stopped, but the memory will not be erased.
7. Press the PLAY/PAUSE button to start program play-
".
back again.
After all programmed tracks have been played, the device
will stop playback automatically and will delete the program
from the memory.
Delete program
Press the STOP button 2x to delete the program from the
memory.
NOTE:
The program will also be deleted when switching to an-
other operating mode.
Cleaning
". Press
CAUTION:
Do not submerge the device in water.
• Before cleaning disconnect from mains power supply.
• Clean the device with a soft damp cloth without deter-
gents.
English
43