Removing; Cleaning - AEG DVBT 4538 Bedienungsanleitung, Garantie

AEG_BDA_DVB_T4538_GB_ka1.qxd:CL_BDA_DVB_T776_GB_ka.qxd
To switch to the marked station, press the "OK"
key.
Press the "EXIT" button, in order to return to the
normal screen display.
Show Favorite List
To call up the list of your favourite stations, press
the "OK" key during operation.
Select the desired group of favourites by repea-
tedly pressing the "yellow" button.
This function can only be used if you have defi-
ned a list of favourites (see Page 41).
Use the "▼ CH-" and "▲ CH+" arrow keys to
select the desired station.
Press the "EXIT" button, in order to return to the
normal screen display.
Displaying teletext/Using the Search Function
To call up teletext, press the "TEXT" key during
operation.
Use the "▲ CH+" and "▼ CH-" arrow buttons to
select the desired teletext language.
Press "OK".
Enter the desired page number using the numeri-
cal keys.
This function can only be used if the station
which is set offers teletext.
In order to use the teletext search function, press
the "TEXT" button again. Use the number and
arrow buttons to enter the desired search term.
Start the search by pressing the "OK" button. The
device searches through the teletext of the chan-
nel that is set for the search term.
After the search has finished you can use the
arrow keys "▼ CH+, ▼ CH-" to select the teletext
pages found. Confirm your selection with the
"OK" button.
In order to exit the search function, press the
"EXIT" button.
In order to exit the teletext again, press the "EXIT"
button again.
44
16.04.2009
Selecting an audio setting
This setting can be used to switch between stereo
(LR), and mono left (LL) or mono right (RR).
In order to change audio settings, press the
"AUDIO" button during operation.
Use the arrow buttons to make your selection or
carry out the adjustments.
Press the "EXIT" button, in order to return to the
normal screen display.
Recall
To call up the channel which was last selected
again, press the „RECALL" key.

Removing

Disconnect the receiver and the connected devi-
ces from the power supply.
Disconnect the antenna cable from the receiver.
Remove the batteries from the remote control if
you do not use the receiver for a long period of
time.
Package the receiver, the cables and the remote
control in the original packaging.
Store the receiver and all accessories in a dry
and dust-free location.
Protect the receiver from frost.

Cleaning

Risk of electric shock!
No fluid must enter the receiver. Never clean it
with a wet cloth.
Prior to cleaning, remove the mains plug from the
mains socket.
Attention!
Do not use cleaning agents which contain sol-
vents, such as benzene or thinner. These agents
may damage the surface of the housing.
Clean the receiver's housing using a dry cloth.
10:48 Uhr Seite 44