Schedule Setup - ECOLINE TV8442 Installationsanleitung

Schedule Setup

For security reasons, this menu is password-protected.
Here you can set the following:
1 Schedule 1 9 Schedule 9
2 Schedule 2 10 Schedule 10
3 Schedule 3 11 Schedule 11
4 Schedule 4 12 Schedule 12
5 Schedule 5 13 Schedule 13
6 Schedule 6 14 Schedule 14
7 Schedule 7 15 Schedule 15
8 Schedule 8 16 Schedule 16
17 Exit
Password protection
To open this menu, enter a valid ID and password.
Factory setting of ID: 1 Password: 1234
Change the password after making your settings. For more information, see Password on page 60.
Proceed as follows:
•
Confirm the menu item with Enter (C).
A password entry window opens.
•
Enter the ID 1 via the keypad. Press camera key 1 and confirm your input by pressing Enter (C).
The cursor jumps to the second line.
•
On the keypad, enter the password "1234" and confirm your input by pressing Enter (C).
If your input is correct, the submenu opens. If your input is incorrect, the device remains in the main
menu.
Schedule
If you confirm this menu item, another submenu opens.
With the direction keys, select the schedule you want to edit and confirm your selection with Enter (C).
A schedule overview opens.
Set the schedule as follows:
1. Use the –/+ keys (10) and (11) to adjust the size of the marking field.
2. Change the position of the marking field using the direction keys (A, B, D and E).
3. To mark the selected area, press Enter (C).
The digital recorder displays active periods with marked areas.
To deactivate periods, press Enter (C) again.
To exit display mode, press ESC (12).
Exit
If you select and confirm this item with Enter (C), the submenu closes.
- Schedules 1–16
- Exit
You select a menu item using the direction keys. If you confirm your
selection with Enter (C), the respective submenu opens.
3
57
2
1