Hard-Disk; Fitting The Hard-Disk Supplied - ECOLINE TV8442 Installationsanleitung

Hard-disk

Use only the hard-disk supplied for the digital recorder or hard-disk models recommended for this purpose.

Fitting the hard-disk supplied

1. : Switch off the digital recorder and open the hard-disk slot.
2. : Turn the handle to face upwards and pull the HDD frame carefully out of the slot.
(Keys and fitting screws are contained in the HDD frame.)
3. : Push the plastic lock of the HDD frame cover down and push the upper cover of the HDD frame back.
4. : Change the hard-disk jumper so that the hard-disk works as SLAVE.
(For WesternDigital disks, do not remove the jumper.)
5. : Connect the hard-disk supplied to the HDD frame using a 4-pole power cable and a flat-tape
data cable.
6. : Fix the hard-disk with two screws on the left and two screws on the right of the
close the frame with the upper cover.
7. : Insert the HDD frame back into the slot, push it until engages, and turn the handle to face down.
Now lock the hard-disk with the key.
46
HDD frame and then