Operation - Lacor 69032 Gebrauchs- Und Instandhaltungsanleitung

1.- Put the pot on the cooker
Put the pot which has food on the center of the ceramic plate.
Make sure the air vent and the air entry are not blockes and there are not metallic objects
around the cooker..
2.- Plug in
After the power supply is connected, the buzzer sounds.
3.- Turn on
When the "on/off" button is pressed, the bruzzer sounds. The "ON/OFF" indicator lamp lights
up, the LED display, indicating that the cooker is in state of standby.
If you don't press any key within 2 minutes, the induction cooker will shut down
automatically.
4.- Temperature mode
After the power supply is connected, press the "function" button, choose "Temp.", the buzzer
sounds, the "ON/OFF" and the "temperature" indicator lamp light up, the cooker entering
the temperature mode working state.
When in temperature mode,, the default mode level shall be level 4, you can make a
regulation by pressing "+" or "-" key .
Temperature function anly applies to cuisine mode such as deep fry, keep warm..
5.- Heating
After the power supply is connected, press the "function" button, choose "Power", the
buzzer sounds, the "ON/OFF" and the "Power" indicator lamp light up, the cooker entering
the heating working state.
After power on, press "+" or "-" button, the cooker can enter the heating working state the
buzzer sounds, the "ON/OFF" and the "Power" indicator lamp light up.
When in heating working mode, the default power level shall be level 4, you can make a
regulation by pressing the "+" or "-" key.
6.- Childproof Lock
When the cooker is in working state, to prevent children from operation, you can activate the
childproof lock by pressing the childproof lock button, the buzzer will sound at the same
time. In the childproof lock state, "Childproof Lock" button and "ON/OFF" button can be
operated, other buttons are non effective.
You can deactivate the childproof lock by pressing the childproof lock button again.
The buzzer will sound.
7.- Timer
In working state, after the "Timer" key is pressed, the buzzer gives out a sound, the nixie
tube flashes and displays the "0:00", indicating that the induction cooker enters timing
working state. Each time the "+" or "-" is pressed, the time can increase or decrease by 1
minute. If it is held, the time will increase or decrease minutes quickly with 10 minutes as an
increment..
After timing period is set, the time stabilizes after the nixie tube flashes for 5 seconds to
confirm the period to be effective. If the timer is 0, the timer is noneffective.
In the timing working state, pressing the timer button two times will cancel the timing.
When the working times reaches, the cooker will shut down automatically.

OPERATION

39