Lacor 69325 Gebrauchs- Und Instandhaltungsanleitung Seite 55

6.- Press "Start" to save the programme.
7.- Press "3" in the prepared mode to use the programme.
8.- When the program has finished, you will hear 3 beeps and the microwave will show "END".
9.- Press the "Stop" button at any time during this process to cancel any adjustment.
10.- Pressing "Stop" during the cooking process puts the microwave into pause mode. Press
"Start" to continue with the process or "Stop" to cancel and return to the prepared mode.
NOTE: The programme is not lost if the microwave is switched off. If the programme needs
resetting, carry out the same process to programme the time and default power or follow the
instructions to use the default parameters.
COOKING X2
To cook for double the preselected time:
1.- Press "X2" and in less than 5 seconds press a button 0 to 9.
2.- The display will show double the preselected time and start to cook.
3.- When the program has finished, you will hear 3 beeps and the microwave will show "END".
4.- Press the "Stop" button at any time during this process to cancel any adjustment.
5.- Pressing "Stop" during the cooking process puts the microwave into pause mode. Press
"Start" to continue with the process or "Stop" to cancel and return to the prepared mode.
COOKING BY STAGES
This function allows cooking food during a maximum combination of three different levels of
power.
1.- Press "Time Entry" to select the time and power of the first stage.
2.- Once again press "Time Entry" and the display will show "S-2". Then select the parameters
of the second stage.
3.- Once again press "Time Entry" and the display will show "S-3". Then select the parameters
of the third stage.
4.- Press "Start" to initiate the cooking.
Example: (First stage; PL7 during 1 minute and 25 seconds, Second stage; PL5 during
5 minutes and 40 seconds):
1.- Open the door and press "1" for 5 seconds.
2.- Press "3" to save the programme in number "3".
3.- Press "Time Entry" and the display shows "00:00"
4.- Press "1", "2" and "5" to introduce the cooking time.
6.- Press "Med-Hi 70%" and the display shows "PL7"
7.- Once again, press "Time Entry" to programme the second stage.
8.- Press "5", "4" and "0" to introduce the cooking time.
9.- PPress "Medium 50%" and the display shows "PL7"
10.- Press "Start" to save the programme.
11.- Press "3" in the prepared mode to use the programme.
12.- Press the "Stop" button at any time during this process to cancel any adjustment.
55