Safety Instructions; Safety Conditions; Technical Specifications - Stalgast 770201 Bedienungsanleitung

Thank you for your purchase of a Stalgast product. Before use please familiarize yourself in detail with the following instruction
manual. Copying of the following manual without the consent of the manufacturer is prohibited. Images and drawings are of
illustrative character and may differ from the purchased product.
Attention: This manual should be kept in a safe place accessible for personnel. The manufacturer reserves the right to change
the technical characteristics of the product without any notice.

1. SAFETY INSTRUCTIONS

• Improper operation and misuse may cause serious damage to the unit or injury to persons.
• The device must only be used for the purpose for which it was designed.
• The manufacturer assumes no responsibility for damage caused by improper handling and use of the device.
• During use, protect the device and the power cord plug from contact with water or other liquids. In the event that the device
inadvertently falls into water, unplug it immediately and have the device checked by a specialist.
Failure to follow these instructions could result in life-threatening injuries.
• Never open the housing of the device yourself.
• Do not insert any objects into the housing of the unit.
• Do not touch the power cord plug with wet hands.
• Regularly check the condition of the plug and the cable. If you detect damage to the plug or cable, have it repaired by a spe-
cialized repair facility.
• If the device falls or is otherwise damaged, always have it inspected and possibly repaired at a specialized repair facility before
further use.
• Never repair the unit yourself - doing so may endanger your life.
• Protect the power cord from contact with sharp or hot objects and keep it away from open flames. If you want to disconnect
the device from a contact, always grasp the plug, never pull on the cable.
• Secure the cable (or extension cord) so that no one mistakenly pulls it out of contact or trips over it.
• Check the functioning of the device during use.
• Do not allow minors or persons without sufficient experience and knowledge to operate the device. The above-mentioned
persons may only operate the device under the supervision of a person responsible for safety.
• If the device is not currently in use or is being cleaned, always disconnect it from the power source by pulling the plug.
• Note : If the power cord plug is connected to a contact, the device remains live at all times.
• Turn the appliance off before you pull the plug out of the socket.
• Never pull the unit by the power cord.

2. SAFETY CONDITIONS

• Do not pull the plug immediately after the appliance is finished, 15 seconds are necessary for the stove to cool down.
• Do not move or shift the stove while a pot, pan, etc. is on it.
• Do not place metal objects such as knives, forks, spoons, lids, cans and aluminum foil, etc. on top of the stove.
• Do not place flammable materials such as paper between the hob and the cooker.
• Do not touch the appliance hotplate immediately after operation. The appliance plate will be hot!
• Do not place the stove near magnetic field sensitive devices such as radios, televisions, credit cards. (Their operation may be
affected).
• Do not block the ventilation openings of the device. Lack of ventilation may result in damage to the device.
• If the disc surface is damaged, turn off the unit and return it for repair immediately.
• Do not place the unit on carpet or other flammable material.
• Do not heat up empty pots to avoid burning them.
• Do not use the stove near fire or water sources.

3. TECHNICAL SPECIFICATIONS

Supply voltage
Power
Dimensions
3.1. Device Description:
• operation with set temperature 60-240°C (regulation in steps of 20°C)
• bottom diameter of the used dishes Ø 120 - Ø 220 mm
• protection against overheating
• use pots and pans suitable for induction cooking
• ceramic worktop
• induction coils switch on when the cookware is placed in the cooker and switch off when the cookware is removed
• heat is generated directly in the bottom of the pot
• Extended Cooling System: allows the fans to run when the appliance is finished and switched off, thus ensuring that the stove
can cool down quickly. For this reason, do not disconnect the appliance from the power supply until 5 to 10 minutes after use.
4. MONTAGES
4.1. Installation to power sources
The device should be connected to an electrical power source using the plug. The socket outlet should be earthed and have the
residual current protection.
4.2. Device placement
Place the unit on a level and stable surface. Install the device in a location that provides sufficient space around it. Keep a distance
of at least 10 cm from other equipment, walls, etc.
230 V ~ 50 Hz
500-2000 W
~ 298x362x65 mm
- 8 -