Swim & Fun FRISBEE FX2 POOL ROBOT Bedienungsanleitung Seite 65

As shown in the figure, push the wheel buckle, pull down the wheel components, and
remove them. Then reinstall the limit pile into chassis to realize the different running
paths
Three settings for wheels are recommended
Setting 1
Default, setting: B-C, for most of pools
Wheel
angle
Running
path
Setting 2
C-A, when the turning angle is too large
Wheel
angle
MV-1940-06-2021 . swim-fun.com © All rights reserved Swim & Fun A/S
UK
65