Sonoff DIY POWR2 Benutzerhandbuch Seite 7

5. Add the device
Tap "+" and select "Quick Pairing", then operate following the prompt on the APP.
Compatible Pairing Mode
If you fail to enter Quick Pairing Mode (Touch), please try "Compatible Pairing Mode" to
pair.
Long press Pairing button for 5s until the Wi-Fi LED indicator changes in a cycle of
two short flashes and one long flash and release. Long press Pairing button for 5s again
until the Wi-Fi LED indicator flashes quickly. Then, the device enters Compatible Pairing
Mode.
Tap "+" and select "Compatible Pairing Mode" on APP. Select Wi-Fi SSID with ITEAD-
****** and enter the password 12345678, and then go back to eWeLink APP and tap
"Next". Be patient until pairing completes.
7