Baseus Encok True Wireless Earphones W04 Pro Benutzerhandbuch Seite 6

Function definitions
Dual earphone use
Start-up – Open the cover of the charging case or press the touch area of the left and
right earphone for 2 seconds in the power-off state. Once the "L" and "R" earphone is
connected, this pairs of earphones will enter TWS pairing mode.
Shutdown – put the earphone into the charging case and the earphone will power off
automatically. The charging case will charge the earphones automatically.
Music mode
Double touch the left earphone – voice assistant
•
Double touch the right earphone – play / pause
•
Three-tap touch area on the left earphone – switch to the previous song
•
Three-tap touch area on the right earphone – switch to the next song
•
Call mode
Double touch the left or right earphone touch area – answer / hang up.
•
Press the left or right earphone touch area for 3 seconds – reject call.
•
Single earphone use
Start – open the charging case cover, the left and right earphone will boot, and pair.
Automatically make up the double-ear connection, enter the two-ear pairing mode, then
use the mobile phone to search and connect, take out one earphone for use.
Shutdown – put the earphone into the charging box and the earphone will power off
automatically. The charging box will charge the earphone automatically.
Double touch the earphone touch area – play / pause / answer / hang up.
Press the left or right earphone touch area for 3 seconds – reject call.
Restore factory settings
Turn off the wireless function of the surrounding mobile phones, take out the left and
right earphone, three-tap the touch area on the earphone when the white light flashes
quickly. Wait for 3 seconds before putting it into the charging case, the earphone
resume the factory settings.
Pairing mode
When the two devices pair for the first time, please keep the wireless earphones
•
within 1 m from your mobile phone.
Open the cover of the charging case, the left and right earphone will pair with
•
each other automatically. Once the "L" and "R" earphones are connected, they will
enter into TWS pairing mode.
Turn on the wireless function on your mobile phone, search for the device, and
•
select the correct device model: Baseus Encok W04 Pro, then click for connection.
6