Replace with the long shackle and place the retaining pin and sticker back in the original
position. Ensure that the long shackle remains in the opened position.
Secure the battery cover by turning the torx cap counter clockwise 90° with the Torx
Screwdriver while the Padlock is unlocked. Push the shackle in and you're done!
Replacing Batteries
Unlock the Padlock and pull the shackle to open position.
•
Turn Torx cap clockwise 90° with the Tox Screwdriver & push battery cover out.
•
Replace the CR2 Battery, close battery cover and turn Torx cap counter clockwise
•
90°.
•
Push the shackle to close position to auto-relock or manual relock.
Please ensure that
the marking on the
torx cap is aligned
to the marking on
the padlock.
8