igloohome Smart Padlock IGP1-02 Benutzerhandbuch Seite 14

I tried to unlock the Padlock but the keypad went off and came
back on with 2 slow and 2 quick beeps.
• The Padlock is low in battery.
Use an Alkaline 9 V Battery to jumpstart the lock and unlock the Padlock to
•
replace the batteries.
Refer to page 8 to know how to replace batteries.
•
The padlock keypad flashes white and LED indicator flashes red
when I active the keypad.
Keypad Security Lockout is triggered on the Padlock.
•
Please refer to page 14.
•
I tried to use a 9 V Battery to jumpstart the lock but unable to.
Please ensure terminals of the 9 V battery are in contact with the jumpstart
•
contact points of the padlock for 2 seconds to activate the padlock.
The 9 V battery terminals must be in constant contact with the padlock 9V
•
contract pins while unlocking it with PIN code or Bluetooth.
I have generated my PINs from the app, but they do not work.
Do a Bluetooth Unlock or sync and try again.
•
Make sure that the generated PIN codes are activated within the activation
•
period before it expired.
The lock is not responding at all.
The Padlock's battery is flat.
•
Use an Alkaline 9 V battery to jumpstart the lock and unlock the padlock to
•
replace the batteries.
Refer to page 8 know how to replace batteries.
•
14