Herunterladen Inhalt Inhalt Diese Seite drucken

ELRO BABY MONITOR PREMIUM BC2000 Bedienungsanleitung Seite 10

Full hd
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

This product is not intended for use as a medical monitor and its use should not replace adult
supervision.
The camera detects normal sound levels within a range of 2 to 3 meters from a child. If the
child moves outside this range, the camera may not be able to detect sounds from him or
her.
It is essential that you check operation on initial installation and regularly thereafter.
Check reception regularly. Test the monitor before use and after changing the location of the
camera.
The housing of camera and monitor should not be opened.
To prevent overheating, keep the product and AC adapters away from direct sunlight and
heat sources such as radiators, stoves, cooking appliances (e.g. stoves and ovens) and other
devices that produce heat (e.g. amplifiers, televisions and stereos).
Ensure proper ventilation of the product during use. Avoid contact with cushions and
furniture that may block ventilation.
Use only the AC adapters supplied with the product, as other adapters may damage the
product.
Connect the adapters only to standard household current (100~240 volts AC).
Position the AC adapters and avoid pinch points to avoid damage.
Do not touch the exposed end of the AC adapter's power cord when it is connected to the
wall outlet.
Images and sounds are transmitted by the product over the public airwaves and may be
picked up by other devices.
Although the transmission distance is 100 m or more (open space), it may vary depending on
obstacles present between camera and monitor.
Note: If you are using the system to watch a young child, do not place the camera where the
child can reach it.
If the monitor is used only with the battery and it is low, it may affect the picture and/or
sound. Connect the AC adapter, the battery will then be charged automatically.
The transmission range of the wireless signal may become weaker if there are heavy
obstacles such as a concrete, brick or metal wall between the camera and the monitor, or if
there are several Wi-Fi routers and devices in your area.
To avoid interference with the RF signal, keep your cell phone at least 1 meter away from the
camera and monitor.
Explosion hazard if battery is replaced with an incorrect type.
Dispose of used batteries according to the instructions.
- 9 -

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis