Warranty; Important Safety Instructions - CFM 01 Benutzerhandbuch

6.4 Warranty

As with all mechanical components, E-Bikes (EPAC) are subject to wear and high loads.
Different materials and components can react in different ways to wear or fatigue. If the
design life of a component has been exceeded, it can suddenly fail and potentially cause
injury. Any form of cracking, scratching or color change in heavily loaded areas indicates
that the life of the component has been reached and should be replaced.
Changes to components of your bike, such as the fork or the frame, can make the
particular part or the entire bike insecure. A poorly installed or modified component can
increase the load on all other components, greatly increasing the likelihood of failure.
Changes can also negatively affect the handling of the bike, resulting in loss of control,
falls and serious injuries. Please do not add, remove or modify any components of your
bike in any way. Find a trained bicycle mechanic if necessary. fürthermore, we
recommend that you contact us (CFM) in advance before changing or adding any
components to ensure the safety of driving.

6.5. Important safety instructions

1. Always wear a helmet while driving.Make sure your helmet complies with local
laws.Keep body parts and other objects away from moving bicycle parts that can cause
damage, such as wheels and chain.Do not place objects
on the battery or the motor.Do not obstruct the drive in any way.
2. Always wear sturdy shoes that grip the pedals safely.Never ride barefoot or with
sandals.
3. Familiarize yourself with the controls of your bike.
4. Wear bright, visible clothing that is not so loose that it accidentally gets caught on
moving parts of the bicycle or is caught by objects on the side of the road or the road.
5. Do not jump on your bike.Jumping on bicycles puts a lot of strain on most components,
such as spokes and pedals.One of the most vulnerable parts for jumping damage is your
front fork.Drivers who insist on jumping with their bike risk both damage to the bike
and serious personal injury.
6. Pay attention to your speed and keep it at a level that, for example, is adapted to the
current weather conditions.Always remember that there is a direct relationship between
speed and control, and speed and component load.
-15-
7. Always follow the local traffic rules.
8. Never drive under the influence of alcohol, medication or drugs.
9. If you have any health problems, consult your doctor before driving.
10. Never endanger yourself and others by reckless driving.
11. Please note that the braking distance increases on rough road conditions such as
gravel or wet surfaces.
12. Please check the cable management of the brakes before cycling.Make sure both
brakes are in good working order and in good condition.
The manufacturer is not liable for incidental or consequential loss or damage due to
directly or indirectly use of this product, the use of this product.
-16-