Charging The Battery; Notes Regarding Environmental Protection; Contact Information - Eufab 13490 Bedienungsanleitung

Charging station:
11 Charging contacts
12 USB charging socket
Vehicle adapter:
13 USB connection
14 Control lamp
Charger:
15 USB connection
Charging cable:
16 USB type A - plug
17 Micro-USB B connector

6.2 CHARGING THE BATTERY

You can connect the workshop lamp directly to charge the battery, Figure 2,
or you may use the charging station, Figure 3. With both options, you can use
either the charger or the vehicle adapter.
The indicator lamp will light red during the charging process. When the
battery pack is charged, the control lamp will light up in green. To end the
charging process, rst disconnect the charger/vehicle adapter at the socket, then
disconnect the workshop lamp from the charging station/cable.
Figure 1: Overview
Figure 2:
Connecting directly
Figure 3:
Using the charging
station
6.3 FUNCTIONS
Pressing the switch multiple times (Position 3 in the overview) enables you to
activate the following functions of the cordless workshop lamp:
• COB light eld on (Position 2 in the overview), dimmed function on
• COB light eld,
• COB light eld dimmed function o /LED torch function on (Position 1 in the
overview)
• o
You can unfold the bracket holder (Position 4 in the overview) to achieve
optimum illumination.
Figure 4: Unfolding the bracket holder
6.4 FIXING
In order to be able to use the light and still have your hands free, you can hang
the cordless workshop lamp
1. using the fold-out hook (Position 5 in the overview), or
2. secure it to a smooth, magnetic surface using the magnetic holders
(Positions 6 and 10 in the overview). Pay attention to ensure that the
surface, for example, the paint job of the car, is not damaged.
7. MAINTENANCE AND CARE
7.1 MAINTENANCE
The lamp, the charging station and the vehicle adapter are maintenance free
when used according to their intended purposes.
7.2 CARE
Clean the lamp, the charging station and the vehicle adapter with a dry, soft
cloth only. Do not use any aggressive cleaning agents or solvent-based cleaners.
Never allow liquids to ingress into the devices.

8. NOTES REGARDING ENVIRONMENTAL PROTECTION

Do not dispose of electrical devices with the household
waste! Electrical and electronic scrap must be collected
separately and disposed of in an environmentally
responsible manner for recycling. Please contact your
community or city administration regarding disposal options
for electrical and electronic scrap.

9. CONTACT INFORMATION

EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
5