Philips Lumea BRI858 Anleitung Seite 24

24
English
to select the light intensity setting as you find
comfortable.
1 Press the on/off button to turn on the device.
2 Select the desired light intensity setting.
Lumea gives you the freedom to select the light
intensity that you find most convenient. To adjust
the light intensity setting, press the on/off button
one or more times until you have reached the
required setting. The corresponding intensity light
level lights up green. You can change the setting at
all times.
The more advanced models
(BRI862/BRI863/BRI864) have a setting advice
feature, called SmartSkin sensor. The sensor
advices the best setting for your skin tone, any
time you want.
a. The setting advice starts automatically, indicated
by the setting lights moving from left to right.
b. Press the device to your skin to get the advice
on the light intensity.
c. After the device scanned your skin, the
suggested intensity lights will blink green to
indicate which intensities you can use based on
your skin tone.
d. Press the on/off button again to confirm that
you want to use the suggested setting advice to
start using the device.
Philips Lumea will automatically use the highest
suggested intensity, indicated by a continuous
green light.