Operation; Requirements For Safe Use; Starting Up The Refrigerator; Switching The Refrigerator On And Off - hanseatic HEKS 12254A2 Gebrauchsanleitung

Operation

Requirements for safe use

– You have read chapter „For your safey" on
page GB-5 and understand all the safety
notices.
– The refrigerator is installed and connected
as described in chapter „Start-up" on page
GB-15.

Starting up the refrigerator

NOTICE
Risk of damage to property!
If the refrigerator has been carried on
its side, lubricant from the compressor
may have got into the refrigeration
circuit.
If possible, do not tilt the refrigerator
■
into a horizontal position.
Allow the refrigerator to stand upright
■
for 2 hours before starting it up. This
gives the lubricant time to flow back
into the compressor.
• Switch off the fuse for the mains socket
to which the refrigerator is connected. A
signal tone will sound, and the refrigerator
light (6) will illuminate when the door is
opened.
All manuals and user guides at all-guides.com
Switching the refrigerator on
and off
Switching on
• Press and hold the Adjust button (1) for 5
rectly installed.
Switching off
1. Press and hold the Adjust button (1) for 5
2. Empty the refrigerator and clean it as
Operation
The refrigerator is factory-set to switch
on automatically when you first insert
the mains plug into the socket.
( ) (1)
1 2 3 4
Adjust
seconds. A signal tone will sound and the
refrigerator light (6) will illuminate. The re-
frigerator is switched on.
If the refrigerator makes disturbing
noises after it is switched on, check
that it is in a stable position and cor-
( ) (1)
1 2 3 4
Adjust
seconds. A signal tone will sound and the
refrigerator light (6) will go out. The refrig-
erator is switched off.
described in chapter „Care and mainte-
nance" on page GB-13.
Page GB-9
Smart
Super
5
Mode
Smart
Super
5
Mode