Troubleshooting - SACKit WOOFit Benutzerhandbuch

Troubleshooting

Connection problems
WOOFit Bluetooth will lock on to the
last connected device, which
requires the connection to be
disconnected before a new unit to be
connected to WOOFit. This can be done
on the connected device (in Bluetooth
settings) or by resetting the speaker.
WOOFit speaker is reset by holding the
mode button down for 3 seconds and
disconnect the Bluetooth signal. The
speaker is now ready to connect with a
new Bluetooth device.
9
Audio quality problems
If the audio quality is poor, a reason
might be low battery level. Therefor
always try to fully charge WOOFit to
secure the absolutely best audio quality.
Warning
To prevent damage, fire or electric
shock, it is strictly forbidden to remove
or replace parts of the unit. Always
consult a professional workshop or a
qualified service center if the unit has
been damaged.