SACKit WOOFit Benutzerhandbuch Seite 6

Charging
To charge the WOOFit speaker, the
included Micro USB charging cable
must be inserted in the Micro USB input
on WOOFit and be connected to a
computer or an adapter.
The charging begins automatically
whether the system is on or off. The
charging status can be seen on the
light indicator. During charging the light
indicator will light up red. When the
battery is fully charged the light indicator
will turn off. A full charge of WOOFit
takes approximately two hours.
5
Connections
Bluetooth
1. WOOFit is turned on by sliding the
power button to the right. When the
light indicator alternately flashed blue
and red, WOOFit is ready for pairing
with desired device. Please notice that
pairing mode automatically will voided
after 5 minutes if not paired. If this
happens, the WOOFit speaker will have
to be restarted.
2. Perform the connection procedure
on your Bluetooth device to find
the WOOFit speaker. This system is
indicated as "WOOFit".
If "WOOFit" does not appear on the
list of found devices, the connection