Suggestion For User; Proper Operation; Operating Precautions; Maintenance And Cleaning - Vivamax GYVH20 Bedienungsanleitung

Suggestion for User

Humidifier with cool boiled water or distilled water. Clean the transducer, water tank, base on a
weekly basis, Replace the used water in the water frequently to keep the unit clean. When the unit is
not to be used for a long time, do not store water in the water tank and water bath. During storage,
clean, mop up or air-dry all parts and then place them in the original package.

Proper Operation

•Place the body horizontally at a suitable place.
•Take out and overturn the water tank, screw off the tank cover as indicated by the arrow at "Add
Water Here" Inject clean tap water.
•Screw down the cover. Wipe off water drops around the water tank and mount the water tank
properly.
•Connect the unit to AC 110V/50HZ power supply, turn on the power switch and the humidifying
indicator will be illuminated.
•There is no staged adjustment of humidifying capacity, which is set to the dryness of your room.
•When there is no water in the water tank, the built-in safety device will disconnect the atomization
circuit automatically, when there is no spray output from the spray nozzle and the water depletion
indicator is illuminated (two colors of the same indicator). To continue the operation, please cut off
the power and replenish the water tank.

Operating Precautions

•Do not add hot water of above 40℃ to the water tank and water bath to avoid discoloration or
distortion.
•Do not let water flow into the body from the air outlet. Wipe off any water outside the body with
dry cloth.
•When the room temperature is below 0℃, please empty the water tank and water bath, lest the
icing of water should damage the components.
•Do not place metals, chemicals and detergents into the water bath, otherwise there might be poor
atomization.
•When there is much water in the water bath, do not move it above, otherwise water might
overflow and flow into the body to cause troubles.
•Do not put the unit at a place with strong light or direct hot air radiation.
•Do not place the unit at an airport and try to keep it away from furniture and electric appliances.
•Do not add water into the water bath directly.
•When the unit is not to be used for a long time, please cut off the power and unplug the plug(this
unit does not have to be grounded).
•Never pour out the water remaining in the water bath without the power turned off, otherwise the
transducer will be burned out immediately.
•When the water tank is fully loaded, the unit can operate for 7-12 hours continuously without
replenishment.

Maintenance and Cleaning

Before cleaning, be sure to cut off the power and unplug the plug.
•Cleaning of water tank over (once every 2-3 weeks)
Screw off the water tank cover, wipe off the scale in it and rinse off with water.
•Cleaning of water bath (once a week)