LENCO CR-605 Bedienungsanleitung Seite 8

FM mode Specific menu options
a. "Scan Setting": How the radio scans for radio stations
1. All stations
2. Strong stations
b. "Audio Setting"
1. Stereo allowed
2. Forced mono
Common settings
a. "System"
i. "Sleep" – off, 15, 30, 45, 60, 90 (minutes)
ii. "Alarm" (see Alarm Set above)
iii. "Time"
"Set Time/date" (also see the section "Setting the time & date manually")
Note:
To improve the radio reception, extend the telescopic antenna and alter the position.
Listen through a headphone
Plug a headphone into the headphone jack (11) on the back of the unit. (Headphone not
included). The headphone volume level can be controlled by the volume buttons (8 & 9)
Technical Specifications
Adaptor Input 100-240V~50/60 Hz
Clock input DC 5V/1A
Connections: 5VDC, 3.5mm headphone out
Power consumption 5W(Max)
Power consumption (standby) <1W
Operating Temperature 0°C-35°C
Operating position Horizontal
1. "Auto update"
a. Update from any
b. Update from DAB+
c. Update from FM
d. No update
2. "Set 12/24 hour" – set AM/PM or 24-hour
3. "Set date format" – DD MM YYYY, MM DD YYYY
4. "Backlight
a. "Timeout" – 10, 20, 30, 45, 60, 90, 120, 180 (seconds), On
b. "On level" – High, medium, low
c. "Dim level" – High, medium, low
5. "Language" – English, Deutsch, Italiano, Francais, Nederlands,
Espanol, Dansk,
6. "Factory reset"
7. "SW version"
8