Herunterladen Diese Seite drucken

OSRAM BATTERYstart 700 PRO Bedienungsanleitung Seite 2

12v lithium starter*

Werbung

BATTERYstart 700 PRO
Warnings**
1) During charging of the jumpstarter it should be placed in a
well-ventilated area.
2) The battery terminal not connected to the chassis has to be
connected first. The other connection is to be made to the
chassis, remote from the battery and fuel line.
3) After Jumpstarting remove the chassis connection and then
the battery connection.
4) The appliance is not to be used by persons (including children)
with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have been given
supervision or instruction.
5) Children being supervised not to play with the appliance.
6) The appliance is only to be used with the unit provided and
it must only be supplied at SELV (Safety extra-low voltage).
7) The connection to the supply mains is to be in accordance
with the national wiring rules.
8) This appliance contains batteries that are non-replaceable.
9) For the purposes of recharging the battery, only use the
detachable supply unit provided with this appliance.
IEC 60417-5957
(2004-12)
(for indoor use only)
2
IEC 60417-6062
(2011-05)
(do not expose to moisture)
IEC 60417-6181
(2013-03)
(detachable supply unit)

Werbung

loading