Specifications - Intermec SF51 Anleitung

All manuals and user guides at all-guides.com
Understanding the Status Light
Color Description
Steady green Battery is fully charged.
Slow flashing Battery is quick charging. Quick charging occurs
green for the first hour that the SF51 is in the charger.
After 1 hour, the battery is charged to
approximately 75% capacity.
Fast flashing green Battery is charging. A fully discharged battery
charges to 100% capacity in approximately 3
hours.
Flashing red The battery temperature is too cold or too hot for
the battery to charge. Make sure that the
temperature is from 0°C to 35°C (32°F to 95°F).
Steady red The battery is not charging. You need to replace the
battery. For help, contact your local Intermec
service representative.
No light The charger is not operating. Make sure that the:
• SF51 is correctly seated in the charger.
• power supply is properly connected to the
• charging pins on the charger and the battery

Specifications

Electrical requirements: x 5V, 6.5A
Operating temperature: 0°C to 35°C (32°F to 95°F)
Storage temperature:
Relative humidity:
Where to Find More Information
To download manuals, go to www.intermec.com. For Product
Support, go to intermec.custhelp.com or call 1-800-755-5505.
6
charger and an AC outlet.
contacts on the SF51 are clean. To clean the
contacts, rub them with a pencil eraser and
remove any debris from the eraser.
-20°C to 60°C (-4°F to 140°F)
0% to 95% non-condensing