Intermec SF51 Anleitung Seite 4

All manuals and user guides at all-guides.com
Mounting screw
(4 places)
4 Connect the power supply to an AC power outlet.
Installing Vertically
1 Remove the four screws and configure the mounting plate for
a vertical installation.
180º
Screw
(4 places)
A
2 Using the mounting plate as a template, mark and drill four
holes in the mounting surface.
3 Attach the power connector from the AC power supply to the
charger, and route the cable through the cable feed.
4
Mounting
plate
Charger
base
B