Snooper s7000 ventura Kurzanleitung Seite 23

2. Power up Ventura by pressing and holding the power button for 2 seconds and then
connect the computer to the Internet.
3. Right click on the
in the system tray and left click 'Download Settings' .
4. Select the files you wish to download (UK Cameras is selected by default). Once you
have selected the files you wish to download left click the 'OK' button.
5. Connect the USB lead to your computer and plug the other end of the lead into the
Ventura in the socket marked with a USB symbol on the side of the unit.
6. The Ventura software will then start to run automatically and download the database files
that you have selected onto your unit. The download process is as follows:
The software will display the serial number of your Ventura and a green progress
●
bar will start to progress across the screen.
The software will then connect to our database server and then download** the
●
database
Ventura will then save the data received.
●
The software will indicate that the download is complete and will instruct you to
●
disconnect Ventura from your PC. Note: The software will shut down automatically after
5 seconds if you do not disconnect your unit as instructed.
**If you have a Firewall on your computer, the Firewall software may inform you
that the Ventura Updater software is trying to access the internet. Please make sure
that you grant/allow/permit access to the Ventura Updater program through the
Firewall.
Please read the messages supplied by your Firewall software carefully before choosing
your option. If you do not allow the program to access the internet through the Firewall,
the download process will fail.
For a more detailed explanation of all the features of Ventura, please refer to the full
user guide situated on the software CD
symbol located in the bottom right hand corner of your desktop
23 • UK