Snooper s7000 ventura Kurzanleitung Seite 20

To see a more detailed description
press the TMC warning.
To avoid the incident press
the Ventura will now calculate an alternative route.
To view the incident press
To return to to the previous screen press
If you want to return to the original route (not
avoiding the incident) then press the TMC icon
and press the Ventura will recalculate the
original route.
10. System Security Code
Ventura incorporates pin code security protection so that only users with access to the
pin code can use and operate the device. To activate the security code access the Menu
by touching the centre of the screen of Ventura and then press the 'Configure' button
next tap the 'System Security Code' icon and then select 'Yes' to switch the function on.
Press the 'Enter Code' button and enter the 4 digit code that you would like to use to
protect your Ventura and press 'OK' . Once this setting has been activated you will need to
enter this code each time you power on your Ventura or you will not be able to operate
the device.
20 • UK