Snooper s7000 ventura Kurzanleitung Seite 18

Stage 1/4 - indicates this is the
first destination of the journey
Estimated time of arrival
to first destination.
Distance to first destination
If, during the journey, you wish to cancel the current stage and begin travelling to the
next stage in your multi-route journey press the summary screen and the message
'Delete current stage?' will be displayed. Press 'OK' and the unit will calculate your route to
the next stage in the multi-route from your current position.
Note: If Ventura is turned 'OFF' and then 'ON' during the multi-route journey the device
will retain the current route and ask you if you wish to continue with the current
destination or with the next stage of the destination or to cancel the multi-route.
9. TMC (Traffic Message Channel)
Mounting the Antenna
Plug the TMC antenna supplied in to the headphone socket on the side of the unit. Then
attach the antenna to the windscreen using the suckers provided. The antenna should
be stretched out in a horizontal position either along the base or top of the windscreen
depending on where you have mounted the device itself.
TMC Icon
Once the unit starts to receive TMC alerts one of the two following icons will appear on
the main screen.
This icon appears if the Ventura has received TMC information but the delay or incident is
not on your route.
.
18 • UK
Total distance of
multi-route journey
Estimated time of
arrival at the end of
multi-route journey.