Blaupunkt SMM501 Bedienungsanleitung Seite 7

SMM501
1. Drive head
2. Appliance body
3. Drive head tilt lock-release button
4. Speed control knob
5. Bowl
BEFORE THE FIRST USE
1. Remove all paper, cardboard, and film protecting the robot and its parts.
2. Clean the robot according to the instructions provided in the CLEANING AND MAINTENANCE
section.
3.It is recommended to assemble and disassemble all the components of the robot before the first
use.
USING THE APPLIANCE
1. Make sure the appliance is disconnected from the power supply. Insert the selected accessory into
the drive head (as shown)
- hook, for kneading and making heavy dough, such as short dough, yeast dough, dough for
dumplings, etc.
- beater, for creaming masses, mixing purées
- whip, for whipping eggs, whites or cream
2. Place the bowl in the base of the appliance and add the products to be mixed in the bowl.
3. Lower the drive head by pressing the lock-release button.
4. Start the mixer with the power switch and set the speed from 1 to 11. The speed control setting
operates smoothly. The electronic power control of the appliance adjusts the motor power to obtain a
stable, uniform, mixing speed.
It is recommended to use speeds 1-3 for making heavy dough, 4-6 for mixing light dough, and 7-11 for
whipping.
5. When the mixing is complete, disconnect the mixer from the power supply. Press the lock-release
button to lift the drive head.
CLEANING AND MAINTENANCE
Wipe the body with the motor with a slightly moistened cloth. Do not immerse in water.
Wash the mixing accessories in water with washing-up liquid. Rinse thoroughly.
Wash the bowl and the bowl lid in water with washing-up liquid. Rinse thoroughly. The bowl can also
be washed in a dishwasher.
6. Bowl lid with feeder
7. Whip
8. Beater
9. Hook
5