eta Vital Blend Fit 3100 Bedienungsanleitung Seite 28

GB
– To press the ingredients to the knife, use the attached pusher only! It has been
designed especially for that purpose.
– Every time before the propulsion unit is switched on, the container needs to be
attached properly and the lid needs to be placed appropriately so as to close the
container. The safety plug or the pusher needs to be inserted in the lid.
– Never remove or attach the container while the propulsion unit is in operation.
Thus you avoid the risk of injury or damage to the appliance.
– After finishing work and before cleaning, always switch off the appliance and
disconnect it from power supply by taking the power cord connector out of the
electric socket.
– The product is intended for home use and similar (in shops, offices and similar
workplaces, in hotels, motels and other residential environments, in facilities
providing accommodation with breakfast). It is not intended for commercial use!
– Do not place any objects on the appliance.
– The appliance must not be used in damp or wet environment and in any
environment with the danger of fire or explosion (spaces where chemicals, fuels, oils,
gases, paints and other flammable or volatile materials are stored).
– Maximum time of processing is 6 min. After that, keep the break for approx. 10 min
necessary for the motor unit to cool off.
– Correctly placing the bowl on the appliance will release the safety lock and the appliance
may be turned on.
– The container is not designed for keeping and storing food. Put the food in another
container suitable for storage after mixing.
– Do not fill the container with water or other liquid to maximum. When in operation, the water
could overflow and get into the appliance. Please observe the maximum permitted volume.
– When mixing or stirring liquids, never add more than 2000 ml of liquid, and always use
the lid. The maximum hot food volume is limited to 1000 ml.
– Never leave the appliance unsupervised and check it during the whole time of
preparing meals!
– The appliance is equipped with thermal safety fuse which disconnects current supply
incase of engine overloading. If it occurs, unplug the appliance and let the appliance
getcooled at least 10 minutes.
– Never immerse the drive unit into water and do not wash it in running water!
– Do not switch on the appliance without ingredients put in!
– Do not remove the lid and dish if the propulsion unit is in operation!
– Before removing the lid or container, let the rotating part stop.
– Do not put more liquid than marked on the dish and always use the lid when mixing or
blending liquids.
– Before preparation, remove possible packages from food (e.g. paper, a PE bag, etc.).
– It is not allowed to modify the surface of the appliance in any way (e.g. using
a selfadhesive wallpaper, foils, etc.).
– CAUTION: Do not use the appliance with a program, time switch or any other part
that turns the appliance on automatically as there is a risk of fire if the appliance is not
covered or placed properly.
– Do not process ingredients of higher temperature than approx. 80 °C.
– If the processed ingredients start to stick on the accessory (e.g. the knife, blender dish
or the lid), turn the appliance off and clean carefully with a spatula.
– Use the mixer only in its working position and at places where there is no risk of tipping
and in sufficient distance from heat sources (e.g. heater, stove, cooker, grill etc.) and
wet surfaces (sinks, basins etc.)
– Do not insert the appliance into any body holes.
28 / 71