Installation; Parent-Unit - Alecto DBX-60 Bedienungsanleitung

3 INSTALLATION

3.1 PARENT-UNIT:

The parent-unit is powered by the supplied battery pack.
This battery pack can be charged using the supplied power adaptor
combined with the charger.
1. Unlock the battery cover by depressing the locking tab and remove
the battery cover from the parent-unit.
2. Insert the supplied battery pack into the parent-unit and connect the
plug with the parent-unit. Pay attention, the plug only fits one way.
Never force its connection.
3. Place the battery cover back onto the parent-unit and lock it using the
locking tab.
4. Connect the power adaptor with the wider plug to the DC6V input at
the rear of the charger and plug the power adaptor into a 230 Volts
wall socket.
Only connect the supplied adaptor. Connecting any other
power adaptor can cause damage to the baby intercom or
even fire.
5. Place the parent-unit onto the charger, briefly pressing it down to
ensure proper contact; the battery indicator on the charger and the
POWER indicator on the parent-unit will switch on and the battery
pack will start charging. (Attention, the CHARGE indicator on the
charger remains lit, even when the battery is fully charged. The
POWER indicator on the parent-unit will switch off when the battery is
fully charged).
ATTENTION: ONLY INSTALL THE SUPPLIED BATTERY
PACK! INSTALLING DIFFERENT MODELS CAN
CAUSE DAMAGE OR EVEN EXPLOSION.
50