Werbung
Verfügbare Sprachen
Verfügbare Sprachen
on the remote to leave the keypad. Confi rm the password by selecting
(Accept)/(Confi rm) and press (OK).
h) To return to main menu, press (EXIT) key a few times on the remote control.
6. Connection to multimedia source through a cable
The projector allows displaying image from various devices. Depending on
your device, you should use a relevant input at the back of the housing.
1.
USB input – such devices as pendrive, external drive
2.
HDMI input – such devices as PC, laptop, console, satellite receiver,
telephone (supporting MHL and only through a dedicated MHL cable).
3.
Video-In (AV) input – such devices as console, satellite receiver.
4.
VGA input – such devices as PC, laptop, satellite receiver.
7. Selection of video source
If more than one video signal is connected to the
projector, you must select the device from which
the projector is to display the image.
a) Use directional keys on the remote control to select sections (Source) and
confi rm with (OK) key on the remote.
b) You will see a list of video sources (described in previous point).
c) Use directional keys on the remote to select the source from which the
image is to be displayed and confi rm your choice with (OK) key.
d) To return to the list of video sources, select (MENU) on the remote.
In video source selection section, you can also set image and sound
parameters:
Image: display mode (standard, soft, vivid), proportions (4:3, 16:9),
brightness, color, contrast, sharpness
EN
Werbung
