Replacing The Batteries; Weight Measurement; Changing The Units; Cleaning And Maintenance - Blaupunkt BSP201 Bedienungsanleitung

BSP201
1. Display
2. Scale platform

REPLACING THE BATTERIES

1. Open the battery cover on the bottom of the device. Remove the used battery.
2. Insert a new battery paying attention to the proper polarity.

WEIGHT MEASUREMENT

Make sure the batteries are operational and inserted into the device. Place the scale on a flat, hard
surface.
Step on the scale. It will start automatically and calibrate, then it will indicate the result of the
measurement. Wait for the result to stabilize, it will pulse for some time, then the scale will turn off
automatically.

CHANGING THE UNITS

To change units from metric (kg) to imperial (lb, st) or vice versa, start the scale and find the units
change button. Press the button to change units.
ERROR MESSAGES
Err – The scale has been overloaded.
Lo – Low battery, replace the batteries.
C – The scale requires recalibration, restart the scale.
If an error is displayed and the scale does not turn off automatically after a longer time, remove the
batteries for more than 5 seconds.

CLEANING AND MAINTENANCE

Wipe the weighing platform with a damp cloth. Then wipe dry. Do not submerge in water or other
liquids.
2