G40014; Filling The Water Tank; Setting The Temperature - TREVIDEA G3FERRARI OPERA Bedienungsanleitung

When placing the iron on its iron stand, make sure that
the surface is stable.
Iron should not be used if dropped, if there are visible
signs of damage, if it loses water during operations.
CAUTION: the iron plate gets very hot during use,
be careful not to touch it, serious risk of burns. Do
not put your face near the steam coming out the iron
plate.
MOD. G40014
1) Spray nozzle
4) Steam button
7) Power cord
9) Base
11) Water tank
FILLING THE TANK
The filling operation must be performed only when the plate has been cooled down and after having
unplugged the unit from the electrical outlet. We recommend the use of demineralized water to prevent
excessive fouling (not covered by warranty).
Place the steam control knob (3) on "0".
1)
2) Open the water tank lid (2).
3) Raise the tip of the iron to avoid any leak of water during the operation.
4) Enter the water up to the maximum level indicated with "MAX" on the tank (11).
5) Close the lid (2).
TEMPERATURE SETTING
The following table provides a guideline on how to adjust the thermostat according to the international
symbols printed on the clothing labels or according to the type of fabric.
•
It is recommended ironing clothes that require low temperatures first and then medium and high
temperatures. This operation allows to save time since the ironing plate heats faster than it cools down.
•
When you do not know the composition, it is recommended to iron a non-visible part of the it, starting
from the lowest temperature to find the most suitable temperature.
2) Water fi ll opening
5) Spray button
8) "Soleplate temperature" indicator light.
10) Soleplate Temperature Selector Dial
12) Soleplate
LABEL FABRIC
Synthetic
(Acrylic, nylon...)
silk – wool
cotton – linen
3) Steam adjustment lever
6) Handle
TEMPERATURE
·
Low temperature
··
Medium temperature
···
High temperature
Do not iron
12