Trouble Shooting; Replacement Parts - Grizzly Tools ERT 3525 Originalbetriebsanleitung

GB

Trouble shooting

Problem
Trimmer vibrates
Trimmer does not
start
Poor cutting per-
formance

Replacement parts

Spare parts and accessories can be obtained at
If you have any other questions, contact the "Service-Center" (see "Service-Center").
24
Possible cause
Spool ( 10) is dirty
Spool ( 10) is defective
No mains power
ON / OFF ( 1) switch
defective
Worn carbon brushes
Motor defective
Line spool ( 10) does not
have sufficient line
Line has not been conduct-
ed out of the spool or only
on one side
www.grizzlytools-service.eu
Remedy
Clean spool (see "Cleaning and
maintenance")
Exchange spool (see "Cleaning and
maintenance")
Check cable, line, plug; repair by
qualified electrician
Repair by After-Sales Service
Lengthen cutting line (see "Op-
eration") or exchange spool (see
"Cleaning and maintenance")
Remove spool and lace line through
opening outwards and return spool.