Hama SMART Bedienungsanleitung Seite 6

If the previously described method for integrating the air purifier does not work, there is the
option of connecting the device via access point (AP) mode.
• In the first step, the WiFi indicator on the air purifier display must flash slowly. If this is not the case,
1
press the OSC button on the top of the air purifier repeatedly for about 5 seconds until it flashes slowly.
• Now proceed in the same way as described before. Before you tick „Next step", select AP mode in the
top right-hand corner.
• The following screen appears:
• Now tick the next step, click Next and select „Connect now" in the next screen. In the WLAN network
2
overview, select the network with the name „SmartLife_XXXX".
• You can ignore any error message that you are currently not connected to the Internet and then return
to the Hama Smart Home (Solution). Your air purifier is now connected.