Technical Specifications; Symbols Used In This Manual; Symbols On The Power Tool - Flex FHE 2-22 SDS-plus Originalbetriebsanleitung

FHE 2-22
Contents

Symbols used in this manual . . . . . . . . 11

Technical specifications . . . . . . . . . . . . 11

Overview . . . . . . . . . . . . . . . . . . . . . . . . 12
For your safety . . . . . . . . . . . . . . . . . . . 13
Noise and vibration . . . . . . . . . . . . . . . . 14
Instructions for use . . . . . . . . . . . . . . . . 15
Maintenance and care . . . . . . . . . . . . . . 15
Disposal information . . . . . . . . . . . . . . . 17
-Declaration of Conformity . . . . . . . . 18
Exemption from liability . . . . . . . . . . . . . 18
Symbols used in this manual
WARNING!
Denotes impending danger.
Non-observance of this warning may result
in death or extremely severe injuries.
CAUTION!
Denotes a possibly dangerous situation.
Non-observance of this warning may result
in slight injury or damage to property.
NOTE!
Denotes application tips and important
information.

Symbols on the power tool

Before switching on the power
tool, read the operating manual!
Wear goggles!
Wear ear protection!
Disposal information for the old
machine (see page 18)!
All manuals and user guides at all-guides.com
Technical specifications
Hammer drill
Rated power
No-load speed
No-load impact rate
Max. single impact energy
(according to "EPTA-
procedure 05/2009")
Tool holder
Max. drill diameter
- Concrete
- Wood
- Metal
Weight according to
"EPTA Procedure 01/2003"
FHE 2-22
SDS-plus
W 710
0-1400
min
-1
min 0-4300
-1
J 2.1
SDS-plus
mm 22
mm 30
mm 13
kg 2.3
11